Car making a clicking noise when braking chevrolet 2005 l

Why Does My Car Make a Clicking Noise When Braking?

If you hear a clicking noise when braking, it means that your brake pads are damaged and need replacing. The clicking noise or rattling is caused by vibrations of loose or worn components in your braking system.

Is It Safe to Drive if Your Car Makes a Clicking Noise When Braking?

Driving your car would not be dangerous if you could ensure that the sound is either from the brake pads or the rusty anti-rattle spring.

Regardless, if the sound results from worn-out suspension components, I suggest you have the problem inspected and repaired immediately. You won’t be able to control your car properly if you have a damaged suspension, which will be risky for you and other drivers on the road.

Also Read: Car Shakes When Braking (Why & How To Fix)


Signs You Need New Brake Pads or Your Brake Fluid Changed

There are a few key signs that you need new brake

There are a few key signs that you need new brake pads or to change your brake fluid.

One sign is if you hear grinding noise when you hit the brakes. Another sign is if your car pulls to one side when braking. If your brake pedal feels soft or spongy, that’s another indication that something might be wrong.

If you notice that your car is taking longer to stop than usual, your brake pads might be worn out.

What Causes Clicking or Popping Noise When Driving

There are several reasons why your car may be making a clicking or popping sound when driving. Here’s what you should pay attention to if you notice this new noise:

The Hubcaps

The hubcaps cover the lug nuts in your steering system. If they become loose, they will constantly flutter and wobble. So, if you hear a clicking or popping noise when driving, this could be the reason. 

The Drive Belt

The drive belt is an important part of your car because it provides power to the AC, alternator, power steering, and crankshaft. It features tensioners, which keep the drive belt tight. However, if they become loose, they may lead to a popping noise when driving. 

The Tires

If your tires are unevenly inflated, it’s not uncommon to hear a popping or clicking noise when driving. That’s why it’s important to make sure your tires are always properly inflated. 

The Brake Calipers

The brake calipers sit tightly in their seat thanks with the help of bolts and pins. However, if they become loose, the brake calipers will flop continuously. That will lead to a popping sound when driving. 

How should I know that my brake pedal is damaged?

As mentioned, for you to know if there are problems with the brake pedal or the entire brake system, it is best to make observations regarding the system and try to watch out for other symptoms of a damaged brake system.

Try to feel the brake pedal. If you notice that the pedal is either squishier or tougher, then that could mean that there might be something wrong with the parts and components that are connected to the pedal. But it could also mean that the problem is in relation to the brake calipers found in the wheels.

Also, try to check if your car is not braking as well as it should or used to be. These clicking noises might come from loose or damaged parts and components found in the entire brake system and not just in the brake pedals.

2. Worn brake shims

Brake shims act as an insulator, dampening the level of noise and vibration coming from the brake pads when your car is breaking. Brake shims also act as a thermal barrier, preventing your pads from getting damaged when they get really hot.

As the brake shims wear, they might become weaker and allow your pads to produce all sorts of sounds.

How to Diagnose Broken or Loose Hubcaps

Take the car out for a spin around the block and make sure you take turns in all directions. Also, drive over potholes and bumps. While you do, listen for a clicking or popping noise. Additionally, you need to accelerate to 40 or 45 miles per hour. If your hubcaps are damaged, you will hear a clicking or popping noise. 

After the road test, you need to check the hubcaps. So, park the vehicle, put the transmission in park or first gear, place wheel chocks on the rear tires, and activate the parking brake. 

Take your flashlight and check the hubcaps for damage of any kind. Also, make sure they are properly installed. When they’re not, they will vibrate and it will lead to damage. You should also remove the hubcap and check the mounting tabs and inner ring for damage. 

After that, put the hubcap back. Make sure you do it properly. Then, remove the wheel chocks and take your car out for another test. If it’s still making a clicking or popping noises, there could be a crack in the hubcap. That means you should get it replaced. 

4. Worn calipers

After a couple of years of driving in wet conditions, your calipers might begin to rust. If ignored, the corrosion can cause the brake pads to bind even though there are abutment clips on top.

Another situation where the caliper can make a clicking noise is if they become loose. They are secured using bolts and guide pins, which keep them tight. Due to corrosion, those bolts or guide pins can become weak, allowing the caliper to move around.

Post navigation

Previous Post Previous post: What is Meant By The Term “Ricer Car”?

Next Post Next post: How To Turn Ignition Without Key – Possible?